Riffe 3 Atmosphere Float
The RIFFE 3 Atmosphere Torpedo Float was designed to maintain lift up to a Maximum of 95 lbs at a depth of 66 ft. This is done by pressurizing the float up to 25 lbs PSI. The outside material is constructed of 22 oz. heavy duty vinyl coated nylon with a 320 lbs/sq. tear strength and will fold up to (14” x 14” x 2” = 4 lbs) for easy transporting. The side zipper allows access to the inner replaceable urethane bladder or for adding lead shot ballast. (5) five 1 ½” buckled nylon strap reinforced zipper. The bladder has a rein- forced 1000 lb. Denier Cordova sleeve to maintain equal pressure throughout the bladder. Dimensions – 39″ length, 12″ width, 11 3/4″ height, 12″ girthIMPORTANT NOTICE: Be sure that the straps and zipper are properly locked and secure before inflating to avoid damage.Features:Two side handles and one rear handleComes with emergency Flair holderSet up to use a flag & ballast weight (3 lb lead shot) (flag & weight not included)Comes standard with Air Pressure Gauge & Schrader Valve AdapterAir Compressor (check local gas station), a scuba tank, or simply by using a bicycle pump.BE SURE TO USE AIR GAUGE WHEN FILLING. IF EXCESS PRESSURE IS USED IT COULD DAMAGE THE FLOAT.
The RIFFE 3 Atmosphere Torpedo Float was designed to maintain lift up to a Maximum of 95 lbs at a depth of 66 ft. This is done by pressurizing the float up to 25 lbs PSI. The outside material is constructed of 22 oz. heavy duty vinyl coated nylon with a 320 lbs/sq. tear strength and will fold up to (14” x 14” x 2” = 4 lbs) for easy transporting. The side zipper allows access to the inner replaceable urethane bladder or for adding lead shot ballast. (5) five 1 ½” buckled nylon strap reinforced zipper. The bladder has a rein- forced 1000 lb. Denier Cordova sleeve to maintain equal pressure throughout the bladder. Dimensions – 39″ length, 12″ width, 11 3/4″ height, 12″ girthIMPORTANT NOTICE: Be sure that the straps and zipper are properly locked and secure before inflating to avoid damage.Features:Two side handles and one rear handleComes with emergency Flair holderSet up to use a flag & ballast weight (3 lb lead shot) (flag & weight not included)Comes standard with Air Pressure Gauge & Schrader Valve AdapterAir Compressor (check local gas station), a scuba tank, or simply by using a bicycle pump.BE SURE TO USE AIR GAUGE WHEN FILLING. IF EXCESS PRESSURE IS USED IT COULD DAMAGE THE FLOAT.
$126.00
Original: $360.00
-65%Riffe 3 Atmosphere Float—
$360.00
$126.00Description
The RIFFE 3 Atmosphere Torpedo Float was designed to maintain lift up to a Maximum of 95 lbs at a depth of 66 ft. This is done by pressurizing the float up to 25 lbs PSI. The outside material is constructed of 22 oz. heavy duty vinyl coated nylon with a 320 lbs/sq. tear strength and will fold up to (14” x 14” x 2” = 4 lbs) for easy transporting. The side zipper allows access to the inner replaceable urethane bladder or for adding lead shot ballast. (5) five 1 ½” buckled nylon strap reinforced zipper. The bladder has a rein- forced 1000 lb. Denier Cordova sleeve to maintain equal pressure throughout the bladder. Dimensions – 39″ length, 12″ width, 11 3/4″ height, 12″ girthIMPORTANT NOTICE: Be sure that the straps and zipper are properly locked and secure before inflating to avoid damage.Features:Two side handles and one rear handleComes with emergency Flair holderSet up to use a flag & ballast weight (3 lb lead shot) (flag & weight not included)Comes standard with Air Pressure Gauge & Schrader Valve AdapterAir Compressor (check local gas station), a scuba tank, or simply by using a bicycle pump.BE SURE TO USE AIR GAUGE WHEN FILLING. IF EXCESS PRESSURE IS USED IT COULD DAMAGE THE FLOAT.
